ShotcreteDirectory

Hiring Guide · 10 min read

How to Choose a Shotcrete or Gunite Contractor

A practical checklist for comparing experience, proposals, insurance, and the crew that will actually perform your work.

Start With Relevant Project Experience

A crew that excels at residential pools may not have the equipment or experience needed for structural repairs, tunnels or slope stabilization, and the reverse is also true. Shotcrete & gunite cover a wide range of work, and the best contractor for your project is one that does your kind of work regularly. Ask for completed projects with comparable geometry, access restrictions, reinforcement, exposure and specifications. Photos are a start, but addresses or project names you can look up are better. Speak to recent clients and, where possible, the engineers, architects or general contractors who inspected that work. Ask them whether the crew showed up when promised, how problems were handled, and whether they would hire them again.

Verify Licensing and Insurance Independently

Check the licensing authority for the state, and sometimes the city or county, where your project is located, not only the contractor's home state. Many crews travel across state lines, and a license in one place does not automatically cover another. Requirements also differ by project type and size. For insurance, ask the contractor's insurer or agent to send you a current certificate directly, and check that the dates, coverage types and limits make sense for your project. Discuss the coverage you need with your own insurance adviser, and ask whether you should be named as an additional insured. A badge on a website, including this directory, or a contractor's own statement should never replace your own verification.

Ask Who Will Be on the Nozzle

With sprayed concrete, the person holding the nozzle has a huge influence on the result. They control the angle, distance and order of placement, and on dry-mix work they also control the water. Two crews from the same company can produce noticeably different work. Ask who will actually be on your job: the nozzleman, the crew foreman and the person supervising placement. Ask about their training and current qualifications, such as nozzleman certification programs where relevant, and how long they have worked on similar projects. Ask whether these key people will stay on your project from start to finish, or whether crews rotate between sites. Then talk through how the team handles reinforcement encasement, rebound, overspray, thickness control, surface preparation and curing.

Look at the Equipment and Site Plan

Shotcrete & gunite need the right equipment for the job: pumps or guns, compressors, hoses, and sometimes lifts or scaffolding. Ask what equipment will be used and whether the contractor owns it or rents it. Ask how they will get material and equipment to the placement area, especially on tight residential lots, hillsides or occupied buildings. A good contractor will also think about what happens around the work: protecting neighboring property and finished surfaces from overspray, controlling dust, managing noise, disposing of rebound and washout water properly, and keeping the site safe. These details rarely show up in a price, but they often decide how smoothly a project goes.

Request Comparable Written Proposals

Give each bidder the same drawings, specifications and scope description, and ask for a written proposal. Then compare them line by line. Confirm who is responsible for access, excavation, forms, reinforcing steel, inspection coordination, testing, protection of adjacent work, water, power, curing, waste removal and site restoration. A low price that leaves out essential work is not directly comparable to a complete proposal; the missing items will either be billed later or not done at all. Pay attention to the exclusions and assumptions sections, which are often where the real differences are. If something is unclear, ask the bidder to clarify in writing before you decide.

Agree on Quality Controls Before Work Starts

Your design professional should define the required testing and what counts as acceptable work. Before placement begins, agree on a preconstruction meeting, mockups or test panels where specified, inspection hold points (moments where work stops until an inspector signs off), weather limits for hot, cold or windy conditions, and who is responsible for curing. Also agree on what happens if something goes wrong: how defects will be identified, who decides whether work must be repaired or removed, and who pays. Settling this in advance is far easier than negotiating it after the concrete has hardened.

Get the Business Terms in Writing

Put the schedule, payment milestones, change-order process and warranty terms in a written contract. Payments should follow completed, verifiable stages of work rather than being heavily front-loaded. Be cautious about very large deposits, pressure to sign immediately, or requests for cash payment. Make sure the contract says what the warranty covers, for how long and what it excludes, and how lien waivers will be handled as payments are made. For larger or structural projects, consider having an attorney review the contract. A few hundred dollars of review can prevent much larger problems.

Warning Signs to Watch For

Most contractors are honest professionals, but these signs are worth taking seriously: - No verifiable license or insurance, or reluctance to provide certificates. - No references for similar work, or references you cannot reach. - A price far below other bids without a clear explanation. - Vague proposals with few details about scope, testing or curing. - Pressure to skip permits, inspections or engineering. - A different crew showing up than the one you were promised. If something feels off, it is fine to slow down, ask more questions or get another bid.

Use the Directory as Your Shortlist

Browse by state, city and service to find contractors that do your type of work in your area, then request quotes from several of them. Quote requests through the directory go straight to the contractor, and you can compare their responses side by side. Remember that featured placement is paid visibility, not a quality ranking, and a listed business is not automatically licensed for every job or location. Do your own checks, get professional engineering and legal advice when your project needs it, and choose the crew that best matches your project, not just the lowest number.

Ready to find a crew?

Browse shotcrete & gunite contractors by state.

Find a contractor