Shotcrete & Gunite Basics · 9 min read
What Are Shotcrete & Gunite? A Practical Project Guide
Where pneumatically applied concrete is used, how a typical project works, and what affects the scope and cost.
Concrete Placed Without Conventional Full-Height Forms
Shotcrete is a method of placing concrete or mortar by pneumatically projecting it onto a prepared surface; gunite commonly refers to its dry-mix process. Instead of pouring concrete into wooden or steel forms and waiting for it to harden, a nozzleman sprays it directly onto reinforcing steel, soil, rock or existing concrete. The speed of the material compacts it as it lands. Because it does not need full forms on both sides, properly designed and installed sprayed concrete can create curved, vertical and overhead shapes that are difficult or expensive to build with conventional cast-in-place methods. That is why it is the go-to method for pool shells, rock-like features, tunnel linings and walls against excavated soil. It is a placement method, though, not a substitute for structural design: the concrete still needs the right mixture, reinforcement and engineering for its purpose.
Wet-Mix and Dry-Mix in Plain Terms
There are two main processes. In wet-mix shotcrete, the concrete is mixed with water before it goes into the hose, usually at a batch plant, and is pumped to the nozzle where compressed air sprays it out. In dry-mix (commonly called gunite), the dry ingredients travel through the hose and the nozzleman adds water at the nozzle. Wet-mix is often favored for high-volume work with steady production. Dry-mix is often favored for repairs and jobs that stop and start, because the material does not begin to set until water is added. Both can produce excellent results in skilled hands. Our guide to shotcrete vs. gunite goes into more detail on the differences.
Common Applications
Sprayed concrete is used across a wide range of projects, including: - Swimming pools, spas and water features. - Retaining walls and soil-nail walls. - Slope stabilization and excavation shoring. - Tunnel and mine linings. - Structural strengthening and seismic retrofits. - Repair and rehabilitation of bridges, tanks, culverts and parking structures. - Canal, channel and reservoir linings. - Decorative rockwork, themed environments and skate parks. The requirements vary a lot between these. A decorative rock feature, a water-retaining tank and a load-bearing repair should not be treated as interchangeable jobs, and a contractor who is excellent at one may not do the others.
Why Owners and Engineers Choose It
Shotcrete & gunite are chosen for practical reasons. Eliminating most formwork can save time and money, especially on curved or irregular shapes. The material bonds well to properly prepared existing concrete and rock, which makes it valuable for repairs and strengthening. Crews can reach places that would be hard to form, such as overhead surfaces, steep slopes and tunnels. There are also limits. Results depend heavily on crew skill, so quality control matters more than with some other methods. Rebound and overspray must be managed. Very thin sections, heavily congested reinforcement or difficult access can make work harder. A good contractor or engineer will tell you honestly whether sprayed concrete is the right fit for your project.
What a Project Usually Involves
Every project is different, but a typical sequence looks like this: 1. Design and engineering, plus permits where required. 2. Site access planning and preparation. 3. Excavation, or removal of damaged concrete for repairs. 4. Installing reinforcing steel, anchors, soil nails or drainage as designed. 5. Preparing the surface so the new concrete bonds properly. 6. Spraying the concrete in layers to the specified thickness. 7. Finishing, trimming and shaping the surface. 8. Curing, which keeps the concrete moist and protected while it gains strength. 9. Inspection and testing as the project requires. Your contractor and design professional should define the exact scope for your site. Some projects, especially slopes, shoring and anything near property lines, need specialist geotechnical input.
What Affects Cost
Shotcrete & gunite pricing depends on many factors: the shape and thickness of the work, the amount of reinforcement, the mixture requirements, how easy it is to reach the placement area, the distance the crew must travel, the production rate, surface preparation, testing requirements, weather, and the finish you want. For that reason, a square-foot price without a clear scope can be misleading. One bid may include excavation, steel, curing and cleanup while another does not. Rather than relying on generic national price ranges, request written estimates based on the same drawings and requirements, and compare what each one includes.
How Long It Takes
The spraying itself can be surprisingly fast. A residential pool shell is often placed in a day, but the full project takes much longer. Engineering, permits, excavation and steel work usually take more time than the placement, and the concrete then needs time to cure before it is loaded, backfilled, plastered or put into service. Weather can also affect the schedule. Hot, cold, windy or very wet conditions may require extra precautions or a delay. Ask your contractor for a realistic timeline from start to finish, including inspections and curing, rather than just the spraying day.
Plan the Next Conversation
Before contacting contractors, gather the basics: your location, the type of project, approximate dimensions, photos of the site, drawings or plans if you have them, and your target schedule. Note any access limits, such as narrow side yards, slopes, overhead lines or occupied buildings, and whether engineering and permits are already in place. These details help a qualified contractor decide quickly whether the project fits their services and what they need to give you a meaningful quote. Then use the directory to find contractors near you who do your type of work, and request quotes from a few of them so you can compare.